Problem med svenska tecken

2020-10-23: Det finns f.n. problem med å, ä och ö på stora delar av Sunets wiki. Felsökning pågår...

Probe and PerfSonar installation

First, we have to install PerfSonar itself. PerfSonar comes in a few different flavours, but the one we're interested in is perfsonar-testpoint.

Step 1 is to configure APT with the PerfSonar package repositories. As root, do this:

cd /etc/apt/sources.list.d/
wget http://downloads.perfsonar.net/debian/perfsonar-release.list
wget -qO - http://downloads.perfsonar.net/debian/perfsonar-official.gpg.key | apt-key add -


We can now update APT and install the packages:

apt-get update
apt
-get install perfsonar-testpoint


If asked about database configuration (Postgres), simply answer that the database should be running on localhost. Choose a fancy password.


We should now configure the OS itself:

In order to be able to run all the tests for dot1X we have to give PerfSonar some additional permissions. It must be able to:

  • Manage wpa-supplicant over its D-BUS interface, we will use 'wpa_cli' to configure the supplicant.
  • Run dhclient as root to acquire an IP address. There are no ways around this, we must be root.


First thing is to do is to make sure the user pscheduler can run dhclient as it wish. Add the following lines to "/etc/sudoers":

Cmnd_Alias DHCP = /sbin/dhclient
User_Alias DCHPUSERS = pscheduler
DCHPUSERS ALL = NOPASSWD: DHCP


We must also add the pscheduler user to the netdev group, otherwise we're not allowed to control wpa_supplicant. In "/etc/group", modify the netdev group to include pscheduler:

netdev:x:109:pi,pscheduler


Modify whatever startup scripts (systemd?) to start wpa_supplicant. The interface, eth0, should be replaced with whatever interface you want to use. Also -u is needed for D-BUS communication.

wpa_supplicant -B -c /etc/wpa_supplicant/wpa_supplicant.conf -i eth0 -D wired -u
  • No labels